MASTERBATCH ADDITIVE COMPOUNDS

MASTERBATCH ADDITIVE COMPOUNDS

Additives and fillers are mixed and presented in granule form İn order to improve the color, physical properties and cost characteristics of the main raw material pigments. Masterbatch additive compounds are materials used in HFFR, PVC, PE, PP, SR, EPDM and similar applications.

Unlike Compound, this product is not used as a raw material, it is used to mix raw materials in certain proportions to provide its colo, to improve physical properties and reduce the cost. 


PRODUCTS
KK-ABSORB

 Product Information:

KK-ABSORB is Moisture-Absorber based on a Polyethylene Resin.

Typical Applications:

KK-ABSORB is suitable for the absorption of moisture when used with recycling materials as well as for applications which are sensitive to moisture. It is also suitable for virgin materials or masterbatches contains inorganic substances based on EVA, PP, PE, PS, HDPE etc.

KK-ABSORB is specially developed for the use in thin films (<50μ).

Moisture problems occur mainly after the recycling of the following materials:

·         DSD (Post consumer waste such as PE, PP and PS)

·         Chalk or talc filled products

·         LLDPE, HDPE, PP, (HI)PS, ABS, PA, PET, etc.

 

Recommendation of addition rate:

·         HFFR Compounds 1-2%

·         PVC Compounds 1-2%

·         Drying of highly filled Compounds 1-3%

·         Recycling 1-3%

·         Extrusion of agglomerates 2-5%

·         Moisture sensitive applications 1-3%

 

It is also used for virgin materails or masterbatches with inorganic Materials

TDS - download MSDS - download
KK-ABSORB15

Product information

 

KK-ABSORB15 is an additive masterbatch that produced in order to eliminate the bad smell of the goods produced from recycled raw materials without using any odor.

Typical Applications:

 

Rubber Compound, Recycled PE or PP. 

TDS - download MSDS - download
KK-AOX6810

 Product Applications:

 

KK-AOX6810- a processing and long-term thermal stabilizer system

– is a synergistic blend of Bionox 1010 and Bionox 168.

KK-AOX6810 is a Multifunctional Additive for HFFR cables compounds, cables production and other filled compounds.
TDS - download MSDS - download
KK-AOX1024

 Product Applications:

 

KK-AOX1024 is highly effective, non-discolouring phenolic antioxidant + metal deactivator masterbatch. It was especially developed for short and long term stabilization of low voltage power cable insulation (XLPE) using silane cross-linking technologies, such as the one-step technology. The antioxidant protects the polymer against thermal degradation and the metal deactivator inhibits the catalytic degradation effect of transition metal ions. The recommended dosage depends on ageing test requirements, on the type of polyetylene and on the type of silane used. It enables the cable producer to meet the requirements of international standards.

TDS - download MSDS - download
KK-CHAR

 Product Information:

 

The KK-CHAR is halogen free flame retardant char forming masterbatch which improves the flame retardant properties as well as the dropping behavior and crust-formation.

Composition:

%60 dimethyl dihydrogenated tallow ammonium resin of the active ingredient.

Advantages:

 

Oxygen, CO2 and water vapour barrier, thermal stability, stiffness, solvent/chemical resistance, weight reduction, fiberglas reduction, rheology control, UV transmission, flame retardant and drop resistance.

Typical Applications:

 

·         HFFR Compounds

·         PVC Compounds

·         Drying of highly filled Compounds

·         Aluminum hydroxide-filled ethylene-vinyl acetate (EVA)

·         Low-density polyethylene (LDPE/LLDPE)

·         Magnesium hydroxide-filled polypropylene (PP)

·         Polypropylene (PP) films

·         Polylactide (PLA) films 

TDS - download MSDS - download
KK-FRH

 Product Information:

 

KK-FRH, based on a LLDPE resin, flame retardant compound. %80 imidacloprid of the active ingredient. These active substances the synergistic effect of various flame retardant mixture.

Typical Applications:

 

It is used flame reterdant applications

TDS - download MSDS - download
KK-FRH1

 Product Information:

 

KK-FRH1 is flame retardant synergist material for PVC applications. It is also used for forming char of the PVC compound. Because of nanosize active material. It also helps improve homogenist of inorganic materials.

TDS - download MSDS - download
KK-FRHC

 Product Information:

 

KK-FRHC is based on a synergist brominated flame retardant compound. It is used for forming char of the compound and also it helps to improve flame retardancy properties. Because of the nano-size of the active material inside it also used for improvement agent of mechanical properties.

Typical Applications:

 

Flame retardant, char forming.

Recommendation of addition rate:

XLPE compound :5-10%

PE compound :10-15%

PP compound :10-15 %

PVC compound :5-10%

HFFR compound :3-4%

TDS - download MSDS - download
KK-FRMB

 Product Information:

 

KK-FRMB is based on a synergist brominated flame reterdant compound. It is used for forming char of the compound and also it helps to improve flame retardancy properties. Because of the nano-size of the active material inside it also used for improvement agent of mechanical properties with highest thermal stability. It's especially desinged for solar cables to improve Flame retardancy.

TDS - download MSDS - download
KK-FRUK

Product Information: 
 

 

 Plastics are combustible and many applications require fire-resistant properties.

KK-FRUK masterbatches inhibit or prevent the combustion process. Material is in pellet form. It is convenient for processing temperature higher than 260°C.

Typical Applications:

·         Extrusion-pipes, cable channer.

·         Enjection molding (HDPE, LDPE, LLDPE).

·         Flame retardancy, char forming.

 

Recommendation of addition rate:

 

XLPE compounds :5-10%

LLDPE compounds :10-15%

PP compounds :10-15%

HDPE compounds :10-15%

PVC compounds :5-8%

HFFR compounds :3-4%

TDS - download MSDS - download
KK-IMP

Product Information:

 

KK-IMP is a masterbatch of using as impact modifier.

Typical Applications:

 

HFFR Compound for EVA, PE and PP applications.

TDS - download MSDS - download
KK-STAB 44

 Product Information:

 

KK-STAB44 is a Multifunctional Additive for HFFR cables compounds, cables production and other filled compounds in pressence of Talc and various Silicates.

It helps to prevent discoloration of the cables due to the use of natural MDH/ATH in formulations, it eliminates problem of corugated surface, it reduces viscosity and torque during the extrusion process, it improves dispersion of the fillers and mechanical properties, it imparts great hydrophobicity and reduced water absorption, so it’s often used to pass Thermal Ageing tests under water conditions.

Product Applications:

 

KK-STAB44 can be used in Compound or Cables Extrusion directly to imparts great Hydrophobicity and reduced Water Absorption. It performs very well in Underwater Thermal Ageing Tests ensuring the overcoming of them.It is also a Curing Agent for the chemical bond between the MAH grafted olefins and the fillers. It can be used in WPC application to impart Water Resistance, Hydro-Repellency and Scratch Resistance.

Recommendation of addition rate: 0,5-1%

KK-F5

 Product Information:

 

KK-F5 is thermoplastic, flame retardant and halogen free compound on polyolefin basis which has been formulated for molding/injection of plug-inserts and/or strain-reliefs pieces used for domestic appliances

KK-F

 Product Information:

 

KK-F is thermoplastic, flame retardant and halogen free compound on polyolefin basis which has been formulated for molding/injection of plug-inserts and/or strain-reliefs pieces used for domestic appliances.

TÜRKÇE
MASTERBATCH ADDITIVE COMPOUNDS

MASTERBATCH ADDITIVE COMPOUNDS

Additives and fillers are mixed and presented in granule form İn order to improve the color, physical properties and cost characteristics of the main raw material pigments. Masterbatch additive compounds are materials used in HFFR, PVC, PE, PP, SR, EPDM and similar applications.

Unlike Compound, this product is not used as a raw material, it is used to mix raw materials in certain proportions to provide its colo, to improve physical properties and reduce the cost. 


PRODUCTS
TÜRKÇE
MASTERBATCH ADDITIVE COMPOUNDS

MASTERBATCH ADDITIVE COMPOUNDS

Additives and fillers are mixed and presented in granule form İn order to improve the color, physical properties and cost characteristics of the main raw material pigments. Masterbatch additive compounds are materials used in HFFR, PVC, PE, PP, SR, EPDM and similar applications.

Unlike Compound, this product is not used as a raw material, it is used to mix raw materials in certain proportions to provide its colo, to improve physical properties and reduce the cost. 


PRODUCTS